نظرة عامة

هندسة مرة واحدة، نشر متعدد.

An emergency field hospital is a rapidly deployable medical facility engineered to restore healthcare capacity within 72 hours of a disaster, epidemic or mass casualty event. structmod emergency field hospitals are built around expandable trailers and container modules that arrive pre-wired, pre-plumbed and functionally tested — so your clinical team walks into a working hospital on day one, not a construction site.

Each emergency field hospital ships with its own power, water, HVAC, medical gas and waste systems, making it fully self-sufficient on arrival. Configurations range from 20-bed primary-care units for remote disaster zones up to 100-bed facilities with damage-control surgery, ICU, imaging and laboratory — all scalable by linking additional modules through shared corridors. For larger surge events, two or more 100-bed units combine into 200-300 bed complexes without additional engineering.

structmod works with health ministries, disaster-relief agencies, NATO-aligned defence forces and UN agencies to specify, manufacture and pre-position emergency field hospitals worldwide. Units can be flown in by C-130 / C-17 aircraft, transported by sea or towed to site, then deployed by a 4-6 person crew with minimal site preparation. Every emergency field hospital meets WHO EMT Type 1 or Type 2 minimum standards and carries full EN 1090 structural certification.

تسلسل النشر النموذجي

  1. الساعة 0–2 — وصول المقطورة أو الحاويات إلى الموقع
  2. الساعة 2–6 — التمركز، التسوية، توصيل الوحدات ببعضها
  3. الساعة 6–12 — إحكام الغلاف، توصيل MEP، الغاز الطبي
  4. الساعة 12–24 — تركيب المعدات، التشغيل، FAT
  5. الساعة 24–72 — تدريب المستخدمين، التسليم التشغيلي
المواصفات التقنية

Spec sheet — STR-2433

الطول الكلي15.3 m · 50.2 ft
العرض (أثناء النقل)2.99 م
العرض (بعد الفرد)2.99 م
الارتفاع (أثناء النقل)3.00 م
مساحة الأرضية (بعد الفرد)45.7 m²
الوزن الفارغ12.3 t
الهيكلفولاذ مُدرفل على الساخن EN 10025 S355JR · EN 1090
جودة اللحامEN ISO 3834-2 · مراقب لحام معتمد (IWE)
الغلافلوح ساندويتش، نواة PIR 80 مم · λ ≈ 0.023 واط/(م·كلفن)
مقاومة الحريقEI-30 · مُختبر وفق EN 13501-2
الأرضيةخشب رقائقي بحري على EPDM · تصنيف مقاومة انزلاق R-10
الكهرباء230 فولت / 50 هرتز · TN-S · مطابق IEC 60364
التكييف والتهويةمضخة حرارية Split Inverter · MERV-8
نطاق التشغيل−25 °م إلى +50 °م (محيط)
مقاومة الرياحمُصمَّم لرياح أساسية 130 كم/س (EN 1991-1-4)
التصميم الزلزاليوفق EN 1998-1 (يوروكود 8) · فئة مطيلية DCM
النقلبصمة ISO 668 · مؤهّل للوحة CSC (الإصدارات الحاوية)
زمن التجهيز24–72 ساعة · طاقم 4–6 أشخاص

Full drawings, calculation notes, DoP, O&M manual and FAT report included with every unit. Specs indicative — configurable to project requirements.

منتجات ذات صلة

المزيد من المستشفيات الميدانية

تواصل عبر واتساب