هندسة مرة واحدة، نشر متعدد.
A multi-storey field hospital stacks inpatient wards vertically over a ground-floor clinical block, delivering significantly higher bed capacity per unit of site area than conventional single-storey field hospitals. structmod multi-storey field hospitals are engineered for scenarios where ground footprint is constrained — dense urban disaster zones, restricted military compounds, or island and coastal deployments — while retaining the rapid-build speed and self-sufficiency that define field hospital capability.
The typical configuration places emergency, surgical, ICU, imaging and laboratory on the ground floor for fastest patient access, with 40-80 inpatient beds distributed across the upper storeys served by lifts and stairs. Lightweight steel frame construction on an EN 1090 certified structure keeps the total deployed weight below threshold for helicopter airlift of individual modules. Full seismic design per Eurocode 8 ensures structural performance in earthquake response deployments, where ground-shake aftershocks are a real operational risk.
structmod multi-storey field hospitals support humanitarian missions, NATO expeditionary deployments, and civil disaster response programmes where capacity must scale without expanding horizontal footprint. Typical applications include urban earthquake response (where clearing sufficient ground area is impractical), military forward deployments in restricted terrain, and maritime disaster response on small island states. Lead time is 4-12 months from contract signature including seismic validation, module production, sea freight, on-site erection, and clinical commissioning.
تسلسل النشر النموذجي
- الشهر 1 — تحضير الموقع، أعمال الأساس، حفر المرافق
- الشهر 2–3 — تشييد الهيكل الفولاذي الأساسي (EN 1090)
- الشهر 3–5 — إغلاق الغلاف، التسقيف، الجدار الستائري
- الشهر 5–7 — التركيب الأولي MEP، الغاز الطبي، طاقة الطوارئ
- الشهر 7–10 — التشطيب الداخلي، تركيب المعدات
- الشهر 10–12 — التشغيل، FAT/SAT، تدريب المستخدمين
- الشهر 12 — التسليم السريري مع ملف تشغيل وصيانة كامل
Spec sheet — STR-2752
| الطول الكلي | 15.2 m · 49.9 ft |
|---|---|
| العرض (أثناء النقل) | 2.99 م |
| العرض (بعد الفرد) | 2.99 م |
| الارتفاع (أثناء النقل) | 3.10 m |
| مساحة الأرضية (بعد الفرد) | 45.4 m² |
| الوزن الفارغ | 16.2 t |
| الهيكل | فولاذ مُدرفل على الساخن EN 10025 S355JR · EN 1090 |
| جودة اللحام | EN ISO 3834-2 · مراقب لحام معتمد (IWE) |
| الغلاف | لوح ساندويتش، نواة PIR 80 مم · λ ≈ 0.023 واط/(م·كلفن) |
| مقاومة الحريق | EI-30 · مُختبر وفق EN 13501-2 |
| الأرضية | خشب رقائقي بحري على EPDM · تصنيف مقاومة انزلاق R-10 |
| الكهرباء | 400 فولت / 50 هرتز · ثلاثي الطور · مطابق IEC 60364 |
| التكييف والتهوية | VRF متعدد الانقسام · HEPA H13 (طبية) |
| نطاق التشغيل | −25 °م إلى +50 °م (محيط) |
| مقاومة الرياح | مُصمَّم لرياح أساسية 140 كم/س (EN 1991-1-4) |
| التصميم الزلزالي | وفق EN 1998-1 (يوروكود 8) · فئة مطيلية DCM |
| النقل | بصمة ISO 668 · مؤهّل للوحة CSC (الإصدارات الحاوية) |
| زمن التجهيز | 4 ساعات · طاقم شخصين |
Full drawings, calculation notes, DoP, O&M manual and FAT report included with every unit. Specs indicative — configurable to project requirements.