هندسة مرة واحدة، نشر متعدد.
A multi-storey modular hospital is a 3-6 storey healthcare facility assembled from volumetric prefabricated modules on a primary structural steel frame. This construction approach is the standard solution for mid-size urban hospitals where site footprint is limited, permanent construction is required, and the project timeline must compress the conventional 30-48 month hospital construction schedule into 12-18 months. structmod multi-storey modular hospitals deliver on all three constraints without compromising clinical performance, lifecycle durability, or compliance with ministry-of-health standards.
The typical layout places high-dependency clinical functions — emergency, surgery, ICU, imaging, sterile services — on the ground and first floors for fastest access and heaviest services demand. Ward floors occupy storeys 2-5 with wings radiating from a central service core housing lifts, stairs, MEP risers, and staff circulation. A rooftop plant deck carries HVAC, water tanks, solar, medical gas reticulation and helicopter landing pad where specified. The primary structural steel frame is erected site-first, modules infill the frame over 8-16 weeks, and finishes plus commissioning complete the final 4-6 months.
structmod delivers multi-storey modular hospitals to national health ministries, university teaching hospitals, private healthcare chains and international development partners. Completed projects include a 6-storey / 340-module / 120-bed regional referral hospital in northern Iraq, a 4-storey / 80-bed maternity and paediatric hospital in East Africa, and a 5-storey / 200-bed expansion wing integrated into an existing tertiary hospital campus. Each project is engineered to destination country building codes, Eurocode 8 seismic, fire compartmentation per EN 13501, and medical electrical per IEC 60364-7-710.
تسلسل النشر النموذجي
- الشهر 1 — تحضير الموقع، أعمال الأساس، حفر المرافق
- الشهر 2–3 — تشييد الهيكل الفولاذي الأساسي (EN 1090)
- الشهر 3–5 — إغلاق الغلاف، التسقيف، الجدار الستائري
- الشهر 5–7 — التركيب الأولي MEP، الغاز الطبي، طاقة الطوارئ
- الشهر 7–10 — التشطيب الداخلي، تركيب المعدات
- الشهر 10–12 — التشغيل، FAT/SAT، تدريب المستخدمين
- الشهر 12 — التسليم السريري مع ملف تشغيل وصيانة كامل
Spec sheet — STR-2992
| الطول الكلي | 15.2 m · 49.9 ft |
|---|---|
| العرض (أثناء النقل) | 2.99 م |
| العرض (بعد الفرد) | 2.99 م |
| الارتفاع (أثناء النقل) | 3.10 m |
| مساحة الأرضية (بعد الفرد) | 45.4 m² |
| الوزن الفارغ | 13.2 t |
| الهيكل | فولاذ مُدرفل على الساخن EN 10025 S355JR · EN 1090 |
| جودة اللحام | EN ISO 3834-2 · مراقب لحام معتمد (IWE) |
| الغلاف | لوح ساندويتش، نواة PIR 80 مم · λ ≈ 0.023 واط/(م·كلفن) |
| مقاومة الحريق | EI-30 · مُختبر وفق EN 13501-2 |
| الأرضية | خشب رقائقي بحري على EPDM · تصنيف مقاومة انزلاق R-10 |
| الكهرباء | 400 فولت / 50 هرتز · ثلاثي الطور · مطابق IEC 60364 |
| التكييف والتهوية | VRF متعدد الانقسام · HEPA H13 (طبية) |
| نطاق التشغيل | −25 °م إلى +50 °م (محيط) |
| مقاومة الرياح | مُصمَّم لرياح أساسية 140 كم/س (EN 1991-1-4) |
| التصميم الزلزالي | وفق EN 1998-1 (يوروكود 8) · فئة مطيلية DCM |
| النقل | بصمة ISO 668 · مؤهّل للوحة CSC (الإصدارات الحاوية) |
| زمن التجهيز | 4 ساعات · طاقم شخصين |
Full drawings, calculation notes, DoP, O&M manual and FAT report included with every unit. Specs indicative — configurable to project requirements.