Engineered once, deployable many times.
A mobile blood donation trailer is a road-deployable phlebotomy and blood collection unit that enables blood services to run drives at any site — corporate offices, university campuses, community centres, schools, factories, shopping centres — expanding donor reach far beyond the fixed blood bank network. structmod mobile blood donation trailers accommodate 4 donor chairs in parallel phlebotomy workflow, with donor screening at the trailer entrance, refreshment and recovery area at exit, and onboard refrigerated storage for collected units through the cold chain.
The donor journey through the trailer follows standard blood service workflow: arrival and registration at a reception desk with secure data entry; donor screening in a private consultation bay with haemoglobin testing and questionnaire review; phlebotomy at one of four donor chairs with single-use collection sets; post-donation refreshment and recovery bay with refreshments, seated rest and staff observation; departure. Each donor chair has dedicated phlebotomy lighting, waste bin (sharps, clinical, general separated), and donor comfort elements (armrest adjustment, fan, call button). Collected units transfer to onboard refrigerator (4±2°C for whole blood) or freezer (for plasma or cryoprecipitate) maintained through the cold chain until transport to the blood processing centre.
structmod mobile blood donation trailers serve national blood services, regional blood banks, Red Cross/Red Crescent operations, hospital blood collection programmes, and corporate blood drives. Lead time is 8-10 weeks from contract signature. EN 1090 EXC-2 chassis construction, DOT/E-mark road homologation, and compliance with destination-country blood service regulations (e.g., UK SaBTO, EU Blood Directive 2002/98/EC, FDA 21 CFR 640) ensure regulatory readiness for clinical blood collection.
Secuencia de despliegue típica
- Hora 0 — el remolque llega en el vehículo tractor, se posiciona y calza
- Hora 0–1 — gatos estabilizadores desplegados, nivelación verificada
- Hora 1–2 — paredes hidráulicas o extensiones desplegadas donde aplique
- Hora 2–3 — conexiones de servicios (electricidad, agua, aguas residuales)
- Hora 3–4 — prueba funcional según protocolo FAT
- Hora 4 — entrega operacional con formación de usuarios
Spec sheet — STR-3403
| Longitud total | 12.3 m · 40.4 ft |
|---|---|
| Anchura (transporte) | 2,99 m |
| Anchura (desplegado) | 2,99 m |
| Altura (transporte) | 2.80 m |
| Superficie (desplegado) | 36.8 m² |
| Peso en seco | 10.3 t |
| Chasis | Acero laminado en caliente EN 10025 S355JR · EN 1090 EXC-2 |
| Calidad de soldadura | EN ISO 3834-3 |
| Envolvente | Panel sándwich, núcleo PIR 80 mm · λ ≈ 0,023 W/(m·K) |
| Resistencia al fuego | EI-30 · ensayado según EN 13501-2 |
| Suelo | Contrachapado marino sobre EPDM · clasificación antideslizante R-10 |
| Instalación eléctrica | 400 V / 50 Hz · trifásico · conforme IEC 60364 |
| Climatización | VRF multi-split · HEPA H13 (médica) |
| Rango de operación | −25 °C a +50 °C ambiente |
| Clasificación de viento | Diseñado para viento básico de 140 km/h (EN 1991-1-4) |
| Transporte | Huella ISO 668 · apto para placa CSC (variantes contenedor) |
| Tiempo de montaje | 5 horas · equipo de 2 personas |
Full drawings, calculation notes, DoP, O&M manual and FAT report included with every unit. Specs indicative — configurable to project requirements.