Engineered once, deployable many times.
A mobile catering trailer is a road-deployable industrial catering kitchen configured with cooking line, preparation zones, refrigerated storage, and dishwashing infrastructure for sustained catering operations. structmod mobile catering trailers serve workforce camp catering producing 200-800 meals per service, event catering at festivals and major venues, military field catering supporting deployed forces, and humanitarian feeding operations during disaster response. The trailer-based configuration drives between catering sites, supporting operators who serve multiple events or follow workforce camps across geographical locations.
Standard configurations include the cooking line (combi oven, range, fryer, griddle — sized to throughput), preparation zones (cold prep with refrigerated work surfaces, hot prep adjacent to cooking line), refrigerated storage (walk-in chiller and freezer sized to multi-day stock), serving counter (hot bain marie, cold display, beverage station), dishwashing workflow (separate dirty return, machine wash, clean storage), and supporting infrastructure (hand wash sinks, dry stores, cleaning chemical store). HACCP-compliant zoning separates raw and cooked food preparation paths; NFPA 96 ventilation captures grease and combustion products; IEC 60364-1 commercial electrical supports the cooking line load.
structmod mobile catering trailers serve catering operations where road-deployable industrial kitchen capability matters — workforce camp catering chains operating across multiple mining or oil & gas sites, event catering specialists serving festivals and major events, military field catering supporting exercises or deployments, and humanitarian agencies running mass feeding operations during disaster response. Lead time is 8-12 weeks from contract signature. EN 1090 EXC-2 chassis, DOT/E-mark vehicle homologation, ISO 22000 food safety design framework, NFPA 96 ventilation.
Secuencia de despliegue típica
- Hora 0 — el remolque llega en el vehículo tractor, se posiciona y calza
- Hora 0–1 — gatos estabilizadores desplegados, nivelación verificada
- Hora 1–2 — paredes hidráulicas o extensiones desplegadas donde aplique
- Hora 2–3 — conexiones de servicios (electricidad, agua, aguas residuales)
- Hora 3–4 — prueba funcional según protocolo FAT
- Hora 4 — entrega operacional con formación de usuarios
Spec sheet — STR-2322
| Longitud total | 12.2 m · 40.0 ft |
|---|---|
| Anchura (transporte) | 2,55 m |
| Anchura (desplegado) | 5.00 m |
| Altura (transporte) | 2.70 m |
| Superficie (desplegado) | 61.0 m² |
| Peso en seco | 9.2 t |
| Chasis | Acero laminado en caliente EN 10025 S355JR · EN 1090 EXC-2 |
| Calidad de soldadura | EN ISO 3834-3 |
| Envolvente | Panel sándwich, núcleo PIR 80 mm · λ ≈ 0,023 W/(m·K) |
| Resistencia al fuego | EI-30 · ensayado según EN 13501-2 |
| Suelo | Contrachapado marino sobre EPDM · clasificación antideslizante R-10 |
| Instalación eléctrica | 230 V / 50 Hz · TN-S · conforme IEC 60364 |
| Climatización | Bomba de calor inverter split · MERV-8 |
| Rango de operación | −25 °C a +50 °C ambiente |
| Clasificación de viento | Diseñado para viento básico de 130 km/h (EN 1991-1-4) |
| Transporte | Huella ISO 668 · apto para placa CSC (variantes contenedor) |
| Tiempo de montaje | 4 horas · equipo de 2 personas |
Full drawings, calculation notes, DoP, O&M manual and FAT report included with every unit. Specs indicative — configurable to project requirements.