Engineered once, deployable many times.
A mobile dental clinic trailer brings full dental surgery capability to communities without fixed dental infrastructure — school-based dental programmes, rural outreach, workforce dental support in remote camps, humanitarian response, and urban underserved populations. structmod mobile dental clinic trailers deliver 2-4 dental chair capacity with all supporting systems — compressor, suction, sterilisation, imaging and consumables storage — integrated into a road-legal semi-trailer that sets up in 2-4 hours at the clinical site.
The standard 4-chair configuration organises the trailer as two treatment zones separated by a central corridor: each zone has two dental chairs with overhead operatory lights, chairside cuspidors, instrument trays and x-ray film/sensor workflow. A centrally-located sterilisation bay handles instrument decontamination, autoclave cycling and sterile packaging for the chairs. Dental compressor and central suction units sit in the trailer's mechanical bay, piped to each chair via the ceiling. Intraoral x-ray operates from a mobile unit shared across chairs, with digital radiography preferred for faster workflow and lower radiation dose. A reception and waiting area at the trailer entrance manages patient flow.
structmod mobile dental clinic trailers serve health ministries running school dental programmes, NGOs delivering humanitarian oral care, corporate operators servicing workforce dental benefits, and private dental chains extending service to underserved populations. Lead time is 8-12 weeks from contract signature. EN 1090 EXC-2 chassis construction, DOT/E-mark road homologation, IEC 60364-7-710 medical electrical, and compliance with destination-country dental practice regulations ensure regulatory readiness in target markets.
Secuencia de despliegue típica
- Hora 0 — el remolque llega en el vehículo tractor, se posiciona y calza
- Hora 0–1 — gatos estabilizadores desplegados, nivelación verificada
- Hora 1–2 — paredes hidráulicas o extensiones desplegadas donde aplique
- Hora 2–3 — conexiones de servicios (electricidad, agua, aguas residuales)
- Hora 3–4 — prueba funcional según protocolo FAT
- Hora 4 — entrega operacional con formación de usuarios
Spec sheet — STR-2780
| Longitud total | 14.0 m · 45.9 ft |
|---|---|
| Anchura (transporte) | 2,99 m |
| Anchura (desplegado) | 2,99 m |
| Altura (transporte) | 2,90 m |
| Superficie (desplegado) | 41.9 m² |
| Peso en seco | 17.0 t |
| Chasis | Acero laminado en caliente EN 10025 S355JR · EN 1090 EXC-2 |
| Calidad de soldadura | EN ISO 3834-3 |
| Envolvente | Panel sándwich, núcleo PIR 80 mm · λ ≈ 0,023 W/(m·K) |
| Resistencia al fuego | EI-30 · ensayado según EN 13501-2 |
| Suelo | Contrachapado marino sobre EPDM · clasificación antideslizante R-10 |
| Instalación eléctrica | 120/240 V · 60 Hz (especificación EE.UU.) · conforme IEC 60364 |
| Climatización | Unidad compacta de cubierta · MERV-13 |
| Rango de operación | −25 °C a +50 °C ambiente |
| Clasificación de viento | Diseñado para viento básico de 150 km/h (EN 1991-1-4) |
| Transporte | Huella ISO 668 · apto para placa CSC (variantes contenedor) |
| Tiempo de montaje | 2 horas · equipo de 2 personas |
Full drawings, calculation notes, DoP, O&M manual and FAT report included with every unit. Specs indicative — configurable to project requirements.