Engineered once, deployable many times.
A mobile emergency care trailer is a road-deployable emergency department that delivers triage, resuscitation, and treatment capability for acute medical and trauma presentations. structmod mobile emergency care trailers support mass-casualty response, disaster relief, remote-event medical cover, hospital emergency department expansion during surge or refurbishment, and military forward emergency care. The unit configures around the emergency care workflow: triage at entry, resuscitation bay for life-threatening presentations, general treatment bays for stabilisation and definitive care, and observation for patients awaiting evacuation or admission.
The standard configuration provides a triage position at the trailer entrance (clinical screening, priority assignment, basic observations), a resuscitation bay equipped for cardiac arrest and major trauma (defibrillator, airway management, ventilator, full monitoring, medication trolley), 4-6 treatment bays (examination couches with monitoring, IV access, basic resuscitation equipment), and an observation/evacuation holding area. Medical gas, suction and IV infusion supplies reticulate through the trailer ceiling to each bay. Radiology support is typically through the co-located mobile x-ray trailer; point-of-care ultrasound (POCUS) is onboard for rapid bedside imaging.
structmod mobile emergency care trailers deploy with humanitarian response teams, national emergency services running event cover, hospitals augmenting ED capacity during flu season or mass-casualty drills, mining and oil & gas operators providing emergency response at remote sites, and military forward medical teams. Lead time is 10-12 weeks from contract signature. Clinical commissioning validates emergency workflow, life-safety systems, monitoring and alarm integration, infection control and PPE workflow — ready for acute clinical care on first deployment.
Secuencia de despliegue típica
- Hora 0 — el remolque llega en el vehículo tractor, se posiciona y calza
- Hora 0–1 — gatos estabilizadores desplegados, nivelación verificada
- Hora 1–2 — paredes hidráulicas o extensiones desplegadas donde aplique
- Hora 2–3 — conexiones de servicios (electricidad, agua, aguas residuales)
- Hora 3–4 — prueba funcional según protocolo FAT
- Hora 4 — entrega operacional con formación de usuarios
Spec sheet — STR-2892
| Longitud total | 13.2 m · 43.3 ft |
|---|---|
| Anchura (transporte) | 2,99 m |
| Anchura (desplegado) | 2,99 m |
| Altura (transporte) | 2.70 m |
| Superficie (desplegado) | 39.5 m² |
| Peso en seco | 12.2 t |
| Chasis | Acero laminado en caliente EN 10025 S355JR · EN 1090 EXC-2 |
| Calidad de soldadura | EN ISO 3834-3 |
| Envolvente | Panel sándwich, núcleo PIR 80 mm · λ ≈ 0,023 W/(m·K) |
| Resistencia al fuego | EI-30 · ensayado según EN 13501-2 |
| Suelo | Contrachapado marino sobre EPDM · clasificación antideslizante R-10 |
| Instalación eléctrica | 230 V / 50 Hz · TN-S · conforme IEC 60364 |
| Climatización | Bomba de calor inverter split · MERV-8 |
| Rango de operación | −25 °C a +50 °C ambiente |
| Clasificación de viento | Diseñado para viento básico de 130 km/h (EN 1991-1-4) |
| Transporte | Huella ISO 668 · apto para placa CSC (variantes contenedor) |
| Tiempo de montaje | 4 horas · equipo de 2 personas |
Full drawings, calculation notes, DoP, O&M manual and FAT report included with every unit. Specs indicative — configurable to project requirements.