Engineered once, deployable many times.
A mobile hospital is a full-capability medical facility built from interconnected trailer modules that couple through shared corridors to form a complete hospital campus. structmod mobile hospitals provide 50 or more beds of inpatient capacity with integrated surgical theatres, intensive care, imaging, laboratory and pharmacy — all pre-wired, pre-plumbed and functionally tested in our Ankara facility before shipment. Deployment takes days rather than months, with clinical operations beginning on arrival rather than after lengthy commissioning.
Standard mobile hospital configurations include a 50-bed inpatient base with 2 operating theatres, 6-bed ICU, emergency department with triage, X-ray imaging, clinical laboratory, pharmacy and CSSD. Additional trailer modules extend capacity — 100-bed ward groups, dedicated obstetrics, paediatric wings, dialysis suites, negative-pressure isolation, CT imaging and specialty outpatient clinics can be specified to match the clinical brief. Every module is self-sufficient on utilities with central backup power, water treatment and medical gas.
structmod supplies mobile hospitals to health ministries, humanitarian agencies, insurance carriers and private healthcare operators worldwide. Typical applications include rural healthcare access, planned hospital renovation bridging, surge capacity for epidemic response, post-disaster replacement of destroyed facilities, and semi-permanent clinical facilities for remote mining or oil & gas operations. Lead time is 8-16 weeks from contract signature for stock-configuration mobile hospitals, scaling to 12-20 weeks for specialty variants.
Secuencia de despliegue típica
- Horas 0–2 — unidades de remolque o contenedor llegan al emplazamiento
- Horas 2–6 — posicionamiento, nivelación y conexión entre unidades
- Horas 6–12 — sellado de envolvente, conexión MEP, gas médico
- Horas 12–24 — instalación de equipos, puesta en marcha, FAT
- Horas 24–72 — formación de usuarios, entrega operacional
Spec sheet — STR-1545
| Longitud total | 14.5 m · 47.6 ft |
|---|---|
| Anchura (transporte) | 2,99 m |
| Anchura (desplegado) | 2,99 m |
| Altura (transporte) | 3,00 m |
| Superficie (desplegado) | 43.4 m² |
| Peso en seco | 15.5 t |
| Chasis | Acero laminado en caliente EN 10025 S355JR · EN 1090 |
| Calidad de soldadura | EN ISO 3834-2 · coordinador de soldadura certificado (IWE) |
| Envolvente | Panel sándwich, núcleo PIR 80 mm · λ ≈ 0,023 W/(m·K) |
| Resistencia al fuego | EI-30 · ensayado según EN 13501-2 |
| Suelo | Contrachapado marino sobre EPDM · clasificación antideslizante R-10 |
| Instalación eléctrica | 230 V / 50 Hz · TN-S · conforme IEC 60364 |
| Climatización | Bomba de calor inverter split · MERV-8 |
| Rango de operación | −25 °C a +50 °C ambiente |
| Clasificación de viento | Diseñado para viento básico de 130 km/h (EN 1991-1-4) |
| Diseño sísmico | Según EN 1998-1 (Eurocódigo 8) · clase de ductilidad DCM |
| Transporte | Huella ISO 668 · apto para placa CSC (variantes contenedor) |
| Tiempo de montaje | 24–72 horas · equipo de 4–6 personas |
Full drawings, calculation notes, DoP, O&M manual and FAT report included with every unit. Specs indicative — configurable to project requirements.