Engineered once, deployable many times.
A multi-storey modular commercial building is a 2-4 storey office, retail or mixed-use building assembled from volumetric modules that stack on an EN 1090 structural steel frame. structmod multi-storey commercial units integrate the lift shaft, stair core, curtain-wall facade and services risers into the modular system — so what ships from the factory is not individual rooms but a complete vertical building, ready to operate once the modules are connected and the site interfaces are closed.
The structural steel frame is site-erected first, forming the skeleton that supports the modules and accommodates the vertical circulation cores. Modules — offices, meeting rooms, retail units, washroom blocks — slot into the frame in planned sequence, typically one floor per day for a 2,000-4,000 m² footprint. The curtain-wall system installs in parallel, providing weather closure before internal fit-out begins. Mechanical and electrical risers in the core connect to horizontal distribution pre-installed in each module, minimising on-site MEP work.
structmod multi-storey commercial buildings deliver to clients who need commercial real estate on a construction schedule that conventional building cannot match — typically 8-12 months from contract to operational handover versus 18-30 months for conventional construction. Applications include corporate headquarters expansion, retail anchors in new developments, mixed-use ground-retail-office blocks, and flagship buildings for organisations that need a premium commercial presence without the conventional construction timeline. Seismic design follows Eurocode 8 with TBDY 2019 compliance for Turkish projects; other national codes apply per destination country.
Secuencia de despliegue típica
- Mes 1 — preparación del emplazamiento, obras de cimentación, zanjas de servicios
- Meses 2–3 — erección de la estructura de acero principal (EN 1090)
- Meses 3–5 — cierre de envolvente, cubierta, muro cortina
- Meses 5–7 — preinstalación MEP, gas médico, alimentación de emergencia
- Meses 7–10 — equipamiento interior, instalación de equipos
- Meses 10–12 — puesta en marcha, FAT/SAT, formación de usuarios
- Mes 12 — entrega clínica con dossier completo de O&M
Spec sheet — STR-2868
| Longitud total | 14.8 m · 48.6 ft |
|---|---|
| Anchura (transporte) | 2,99 m |
| Anchura (desplegado) | 2,99 m |
| Altura (transporte) | 2.70 m |
| Superficie (desplegado) | 44.3 m² |
| Peso en seco | 15.8 t |
| Chasis | Acero laminado en caliente EN 10025 S355JR · EN 1090 |
| Calidad de soldadura | EN ISO 3834-2 · coordinador de soldadura certificado (IWE) |
| Envolvente | Panel sándwich, núcleo PIR 80 mm · λ ≈ 0,023 W/(m·K) |
| Resistencia al fuego | EI-30 · ensayado según EN 13501-2 |
| Suelo | Contrachapado marino sobre EPDM · clasificación antideslizante R-10 |
| Instalación eléctrica | 230 V / 50 Hz · TN-S · conforme IEC 60364 |
| Climatización | Bomba de calor inverter split · MERV-8 |
| Rango de operación | −25 °C a +50 °C ambiente |
| Clasificación de viento | Diseñado para viento básico de 130 km/h (EN 1991-1-4) |
| Diseño sísmico | Según EN 1998-1 (Eurocódigo 8) · clase de ductilidad DCM |
| Transporte | Huella ISO 668 · apto para placa CSC (variantes contenedor) |
| Tiempo de montaje | 5 horas · equipo de 2 personas |
Full drawings, calculation notes, DoP, O&M manual and FAT report included with every unit. Specs indicative — configurable to project requirements.