Engineered once, deployable many times.
A multi-storey field hospital stacks inpatient wards vertically over a ground-floor clinical block, delivering significantly higher bed capacity per unit of site area than conventional single-storey field hospitals. structmod multi-storey field hospitals are engineered for scenarios where ground footprint is constrained — dense urban disaster zones, restricted military compounds, or island and coastal deployments — while retaining the rapid-build speed and self-sufficiency that define field hospital capability.
The typical configuration places emergency, surgical, ICU, imaging and laboratory on the ground floor for fastest patient access, with 40-80 inpatient beds distributed across the upper storeys served by lifts and stairs. Lightweight steel frame construction on an EN 1090 certified structure keeps the total deployed weight below threshold for helicopter airlift of individual modules. Full seismic design per Eurocode 8 ensures structural performance in earthquake response deployments, where ground-shake aftershocks are a real operational risk.
structmod multi-storey field hospitals support humanitarian missions, NATO expeditionary deployments, and civil disaster response programmes where capacity must scale without expanding horizontal footprint. Typical applications include urban earthquake response (where clearing sufficient ground area is impractical), military forward deployments in restricted terrain, and maritime disaster response on small island states. Lead time is 4-12 months from contract signature including seismic validation, module production, sea freight, on-site erection, and clinical commissioning.
Secuencia de despliegue típica
- Mes 1 — preparación del emplazamiento, obras de cimentación, zanjas de servicios
- Meses 2–3 — erección de la estructura de acero principal (EN 1090)
- Meses 3–5 — cierre de envolvente, cubierta, muro cortina
- Meses 5–7 — preinstalación MEP, gas médico, alimentación de emergencia
- Meses 7–10 — equipamiento interior, instalación de equipos
- Meses 10–12 — puesta en marcha, FAT/SAT, formación de usuarios
- Mes 12 — entrega clínica con dossier completo de O&M
Spec sheet — STR-2752
| Longitud total | 15.2 m · 49.9 ft |
|---|---|
| Anchura (transporte) | 2,99 m |
| Anchura (desplegado) | 2,99 m |
| Altura (transporte) | 3.10 m |
| Superficie (desplegado) | 45.4 m² |
| Peso en seco | 16.2 t |
| Chasis | Acero laminado en caliente EN 10025 S355JR · EN 1090 |
| Calidad de soldadura | EN ISO 3834-2 · coordinador de soldadura certificado (IWE) |
| Envolvente | Panel sándwich, núcleo PIR 80 mm · λ ≈ 0,023 W/(m·K) |
| Resistencia al fuego | EI-30 · ensayado según EN 13501-2 |
| Suelo | Contrachapado marino sobre EPDM · clasificación antideslizante R-10 |
| Instalación eléctrica | 400 V / 50 Hz · trifásico · conforme IEC 60364 |
| Climatización | VRF multi-split · HEPA H13 (médica) |
| Rango de operación | −25 °C a +50 °C ambiente |
| Clasificación de viento | Diseñado para viento básico de 140 km/h (EN 1991-1-4) |
| Diseño sísmico | Según EN 1998-1 (Eurocódigo 8) · clase de ductilidad DCM |
| Transporte | Huella ISO 668 · apto para placa CSC (variantes contenedor) |
| Tiempo de montaje | 4 horas · equipo de 2 personas |
Full drawings, calculation notes, DoP, O&M manual and FAT report included with every unit. Specs indicative — configurable to project requirements.