Engineered once, deployable many times.
A truck-based mobile hospital integrates the clinical facility onto a self-driving truck chassis, eliminating the need for a separate tractor and enabling one-person deployment to site. structmod truck-based mobile hospitals carry full clinical capability — treatment, surgery, imaging or specialty — on a purpose-built rigid chassis optimised for medical payload, stability and on-site deployment. The result is the fastest-deploying mobile medical unit available: drive to site, stabilise, deploy, operate.
Truck-based mobile hospital configurations include primary-care clinic trucks with 4-6 examination bays, surgical trucks with one or two operating theatres, imaging trucks carrying CT, MRI or mammography, and specialty trucks for dialysis, dental, obstetrics or ophthalmology. Each truck is independently road-legal (typically within 10-14 m overall length, 2.55 m transport width, expandable to 4-5 m via hydraulic walls where fitted), meaning the hospital drives to site without escort and sets up with jack stabilisation and wall expansion in 2-4 hours.
structmod truck-based mobile hospitals support emergency response teams, national health screening programmes, rural healthcare access initiatives and rapid-deployment military medical support. The truck platform excels where deployment speed is paramount, where driver-only logistics are required (no separate tractor, no external towing), or where the mobile unit cycles frequently between multiple sites. Lead time is 8-16 weeks from contract signature. Chassis selection — typically Mercedes Atego, MAN TGM, Iveco Stralis or DAF LF — is specified to host nation homologation requirements.
Secuencia de despliegue típica
- Horas 0–2 — unidades de remolque o contenedor llegan al emplazamiento
- Horas 2–6 — posicionamiento, nivelación y conexión entre unidades
- Horas 6–12 — sellado de envolvente, conexión MEP, gas médico
- Horas 12–24 — instalación de equipos, puesta en marcha, FAT
- Horas 24–72 — formación de usuarios, entrega operacional
Spec sheet — STR-2699
| Longitud total | 13.9 m · 45.6 ft |
|---|---|
| Anchura (transporte) | 2,99 m |
| Anchura (desplegado) | 2,99 m |
| Altura (transporte) | 3.20 m |
| Superficie (desplegado) | 41.6 m² |
| Peso en seco | 17.9 t |
| Chasis | Acero laminado en caliente EN 10025 S355JR · EN 1090 |
| Calidad de soldadura | EN ISO 3834-2 · coordinador de soldadura certificado (IWE) |
| Envolvente | Panel sándwich, núcleo PIR 80 mm · λ ≈ 0,023 W/(m·K) |
| Resistencia al fuego | EI-30 · ensayado según EN 13501-2 |
| Suelo | Contrachapado marino sobre EPDM · clasificación antideslizante R-10 |
| Instalación eléctrica | 120/240 V · 60 Hz (especificación EE.UU.) · conforme IEC 60364 |
| Climatización | Unidad compacta de cubierta · MERV-13 |
| Rango de operación | −25 °C a +50 °C ambiente |
| Clasificación de viento | Diseñado para viento básico de 150 km/h (EN 1991-1-4) |
| Diseño sísmico | Según EN 1998-1 (Eurocódigo 8) · clase de ductilidad DCM |
| Transporte | Huella ISO 668 · apto para placa CSC (variantes contenedor) |
| Tiempo de montaje | 24–72 horas · equipo de 4–6 personas |
Full drawings, calculation notes, DoP, O&M manual and FAT report included with every unit. Specs indicative — configurable to project requirements.