Engineered once, deployable many times.
A modular hospitality room is a hotel-grade guest room delivered as a complete factory-finished volumetric module — bed, en-suite bathroom, wardrobe, work desk, climate control, lighting, and finishes already installed in the factory. structmod modular hospitality rooms serve hotel chains accelerating new-build programmes (Marriott Fairfield, Hilton Garden Inn, Holiday Inn Express, AC Hotel — all major brands now use modular construction for repeatable room formats), boutique hotel developers building distinctive properties on tight timelines, extended-stay operators expanding inventory, and resort developers building large room counts in remote or seasonal locations. Modular construction reduces hotel build time by up to 50% versus conventional construction.
Standard configurations follow hotel brand specifications. Typical room dimensions are 3-4 m wide × 6-8 m long × 2.8-3.2 m high — accommodating one queen or king bed plus en-suite bathroom (shower, toilet, basin) plus circulation. Larger configurations support two queen beds for family rooms, or single bed plus expanded work area for business hotels. Each room module arrives finished with brand-specified furniture, fixtures and equipment (FFE), connected MEP services (one connection point per side for power, water and drain), and tested ready for occupancy. On-site work is limited to lifting modules into position on the structural frame, connecting MEP services, and final corridor finishes — typical 3-6 month total construction for 100-200 room hotels.
structmod modular hospitality rooms support hotel development across European and Gulf markets where construction speed and cost certainty drive procurement decisions. Compared to conventional construction, modular typically delivers meaningful total project cost savings primarily through schedule reduction. Key brand-driven specifications include acoustic separation between rooms (typical STC 50-55 partition rating), fire compartmentation per hotel fire code, accessibility for ADA-equivalent hotel rooms, and energy performance per destination-country building code. Lead time is 12-16 weeks from contract signature for room module production at scale (50-200 modules per project).
Typical deployment sequence
- Day 1 — site foundation verified, screw jacks or strip footings in place
- Day 2–3 — modules lifted into position by mobile crane
- Day 3–4 — inter-module connections and envelope sealing
- Day 4–5 — MEP connections, wet testing
- Day 5–6 — interior finish, fixtures and equipment install
- Day 7 — commissioning, FAT report, user training and handover
Spec sheet — STR-2501
| Overall length | 14.1 m · 46.3 ft |
|---|---|
| Width (transport) | 2.99 m |
| Width (deployed) | 2.99 m |
| Height (transport) | 3.20 m |
| Floor area (deployed) | 42.2 m² |
| Dry weight | 17.1 t |
| Chassis | EN 10025 S355JR hot-rolled steel · EN 1090 EXC-2 |
| Welding quality | EN ISO 3834-3 |
| Envelope | Sandwich panel, PIR core 80 mm · λ ≈ 0.023 W/(m·K) |
| Fire resistance | EI-30 · tested to EN 13501-2 |
| Floor | Marine plywood on EPDM · R-10 slip rating |
| Electrical | 120/240 V · 60 Hz (US-spec) · IEC 60364 compliant |
| HVAC | Packaged rooftop · MERV-13 |
| Operating range | −25 °C to +50 °C ambient |
| Wind rating | Designed for 150 km/h basic wind (EN 1991-1-4) |
| Seismic design | Per EN 1998-1 (Eurocode 8) · ductility class DCM |
| Transport | ISO 668 footprint · CSC plate eligible (container variants) |
| Setup time | 3 hours · 2-person crew |
Full drawings, calculation notes, DoP, O&M manual and FAT report included with every unit. Specs indicative — configurable to project requirements.