Question 1

How does the mobile workshop trailer differ from the modular workshop unit?

Accepted Answer

Mobile workshop trailer is road-deployable on chassis — smaller workshop footprint, suited to field maintenance operations at remote or mobile sites. Modular workshop unit is permanent or semi-permanent installation — larger workshop with overhead crane support and heavy equipment bays, suited to permanent maintenance operations at fixed sites. Trailer suits mobility and lighter maintenance scope; modular suits permanence and heavy maintenance capability.

Question 2

What maintenance operations does the mobile workshop trailer support?

Accepted Answer

Standard configuration supports vehicle maintenance (light to medium vehicles — engine work, suspension, brakes, electrical diagnostics), small equipment maintenance (pumps, compressors, generators, specialty tools), metal fabrication (welding, cutting, drilling, turning — appropriate for repair fabrication rather than production manufacturing), and general repair work. Heavy equipment maintenance (large trucks, heavy plant, military vehicles) requiring overhead crane support typically uses modular workshop unit or purpose-built heavy workshop facilities.

Question 3

What welding capabilities are supported?

Accepted Answer

Welding bay supports MIG welding (most common for general fabrication and repair), TIG welding (precision work, stainless steel, aluminium), stick welding (heavy structural work, outdoor welding), and optional plasma cutting. Fume extraction per EN 12792 captures welding fume at source through articulated extraction arms, routed through HEPA filtration before discharge. Welding power supplies are specified based on expected workload — higher amperage for heavy structural work, lower amperage for precision work.

Question 4

What electrical and air capacity does the workshop provide?

Accepted Answer

3-phase electrical distribution typically 32A (22 kVA) or 63A (44 kVA) per workshop bay — supporting welding power supplies, electrical tools, battery chargers, and workshop lighting. Compressed air distribution (typical 10-13 bar) feeds pneumatic tools, tyre inflation, and equipment cleaning — onboard air compressor (typical 5-15 kW motor) maintains system pressure during sustained use. Higher capacity configurations available for heavy workshop applications.

Question 5

Can the mobile workshop trailer operate off-grid at remote sites?

Accepted Answer

Yes, with the autonomous configuration. Onboard generator (typical 60-100 kVA for full workshop operation) supports electrical load including welding and compressed air. Fuel storage supports 5-7 days of continuous operation. Water tanks and wastewater holding support operator washroom. Satellite or cellular connectivity for coordination with central maintenance management. Total autonomous operation typically 5-10 days at intermittent workshop use. Connection to site utilities is preferred where available for sustained operations.

Toplam uzunluk	13.0 m · 42.7 ft
Genişlik (nakliye)	2,55 m
Genişlik (konuşlandırılmış)	5.00 m
Yükseklik (nakliye)	2.70 m
Zemin alanı (konuşlandırılmış)	65.0 m²
Boş ağırlık	12.0 t
Şasi	EN 10025 S355JR sıcak hadde çelik · EN 1090 EXC-2
Kaynak kalitesi	EN ISO 3834-3
Zarf	Sandviç panel, PIR çekirdek 80 mm · λ ≈ 0,023 W/(m·K)
Yangın direnci	EI-30 · EN 13501-2'ye göre test edilmiş
Zemin	EPDM üzerine denizcilik kontrplak · R-10 kayma sınıfı
Elektrik tesisatı	230 V / 50 Hz · TN-S · IEC 60364 uyumlu
İklimlendirme	Split inverter ısı pompası · MERV-8
Çalışma aralığı	−25 °C ile +50 °C ortam
Rüzgar sınıfı	130 km/s temel rüzgar için tasarlandı (EN 1991-1-4)
Nakliye	ISO 668 ayak izi · CSC plakası uygun (konteyner varyantlar)
Kurulum süresi	2 saat · 2 kişilik ekip

Mobile Workshop Trailer — Engineered once, deployable many times.

Tipik Konuşlanma Sırası

Spec sheet — STR-2370

Daha fazla mobil römork

Mobile Accommodation Trailer

Mobile ATM / Bank Trailer

Mobil Fırın Römorku