Name: Multi-Storey Modular Hospital
Brand: structmod
SKU: STR-MULTISTOREYM
Availability: PreOrder
Rating: 4.8 (12 reviews)

Question 1

What is the maximum practical height for a modular hospital?

Accepted Answer

Six storeys is the practical maximum for full modular construction using volumetric modules. Beyond 6 storeys, hybrid modular-structural construction becomes more efficient — the primary steel or concrete frame is site-erected, and modules infill the frame at each floor level. structmod has engineered hospital projects up to 8 storeys using this hybrid approach.

Question 2

How does a multi-storey modular hospital handle seismic loads?

Accepted Answer

Seismic design follows Eurocode 8 (EN 1998-1) with ductility class DCM (medium) as standard, upgradeable to DCH (high) for high-seismicity sites. The primary steel frame carries lateral loads through moment-resisting connections or bracing. Modules are connected to the frame rather than to each other, so seismic performance depends on the primary structure rather than module-to-module continuity. For Turkish projects, design also complies with TBDY 2019.

Question 3

What is the bed density achievable?

Accepted Answer

Typical planning is 30-50 inpatient beds per ward floor (2,000-3,000 m² per floor). A 5-storey hospital with 4 ward floors carries 120-200 inpatient beds plus full clinical and support services on the ground and first floors. Higher bed density (up to 250 beds in 5 storeys) is achievable with more compact ward configurations but at the cost of patient room size and amenity.

Question 4

Can the modular hospital be expanded horizontally after construction?

Accepted Answer

Yes. The modular grid extends horizontally by adding new bays to the existing frame. This is the preferred expansion method over vertical expansion (adding storeys) because it minimises disruption to existing clinical services — the expansion wing commissions independently and links to the main hospital through a connecting corridor at the appropriate floor levels.

Question 5

How are the module connections detailed between storeys?

Accepted Answer

Modules rest on the primary steel frame and connect to each other through structural bearings at the four column lines. Load path is module floor → module columns → frame columns → foundations. Module-to-module joints are detailed for fire compartmentation (EI-60 horizontal, EI-90 vertical in stair cores) and acoustic separation (45-55 dB depending on room function).

Toplam uzunluk	15.2 m · 49.9 ft
Genişlik (nakliye)	2,99 m
Genişlik (konuşlandırılmış)	2,99 m
Yükseklik (nakliye)	3.10 m
Zemin alanı (konuşlandırılmış)	45.4 m²
Boş ağırlık	13.2 t
Şasi	EN 10025 S355JR sıcak hadde çelik · EN 1090
Kaynak kalitesi	EN ISO 3834-2 · sertifikalı kaynak koordinatörü (IWE)
Zarf	Sandviç panel, PIR çekirdek 80 mm · λ ≈ 0,023 W/(m·K)
Yangın direnci	EI-30 · EN 13501-2'ye göre test edilmiş
Zemin	EPDM üzerine denizcilik kontrplak · R-10 kayma sınıfı
Elektrik tesisatı	400 V / 50 Hz · 3 fazlı · IEC 60364 uyumlu
İklimlendirme	VRF çok bölmeli · HEPA H13 (tıbbi)
Çalışma aralığı	−25 °C ile +50 °C ortam
Rüzgar sınıfı	140 km/s temel rüzgar için tasarlandı (EN 1991-1-4)
Sismik tasarım	EN 1998-1 (Eurokod 8) uyarınca · sünek sınıf DCM
Nakliye	ISO 668 ayak izi · CSC plakası uygun (konteyner varyantlar)
Kurulum süresi	4 saat · 2 kişilik ekip

Multi-Storey Modular Hospital — Engineered once, deployable many times.

Tipik Konuşlanma Sırası

Spec sheet — STR-2992

Sağlık kategorisinden daha fazlası

Mobile Blood Donation Trailer

Mobile Clinic Trailer

Mobile CT Scan / MRI Trailer