Question 1

How does the sterilisation workflow comply with dental infection control standards?

Accepted Answer

The sterilisation suite follows a linear dirty-to-clean workflow: instrument receipt at the dirty end, ultrasonic cleaning, thermal disinfection, inspection and packaging, autoclave cycle (vacuum-cycle B autoclave for hollow instruments), sterile storage. Cycle monitoring includes chemical indicators per load, biological indicators weekly, and equipment validation per annual schedule. Workflow complies with HTM 01-05 (UK), EN 13060 (EU autoclaves), or destination-country dental infection control standard.

Question 2

What dental specialties can be accommodated?

Accepted Answer

The base configuration supports general dentistry (restorative, preventive, periodontal, paediatric). Specialty configurations extend to: orthodontics (with cephalometric imaging, treatment planning workspace), endodontics (with operating microscope, apex locator), oral surgery (with sedation suite, recovery), prosthodontics (with impression workflow, lab access), implantology (with cone-beam CT, surgical guide workflow), and paediatric dentistry (with sedation capability).

Question 3

What is the patient throughput of a 4-chair modular dental clinic?

Accepted Answer

A 4-chair modular dental clinic handles 32-64 patients per 8-hour clinical day across all chairs, depending on procedure mix. Routine check-ups and cleanings (30-45 minutes per patient) push throughput higher; complex restorative work (60-90 minutes) reduces it. Two-shift operation (morning and afternoon dental teams) doubles daily capacity but requires staff scheduling and chair turnover protocols.

Question 4

Can the dental clinic include a sedation or general anaesthesia suite?

Accepted Answer

Yes. The sedation suite configuration adds an oral surgery / sedation chair with patient monitoring (ECG, SpO2, NIBP, EtCO2), anaesthesia delivery, recovery bay with monitored seats, and emergency drugs and equipment. General anaesthesia configurations require additional infrastructure (full anaesthesia machine, dedicated recovery, day-case admission discharge workflow) and regulatory licensing per destination country.

Question 5

What dental laboratory equipment is included in the standard configuration?

Accepted Answer

Chairside laboratory equipment includes plaster trimmer, polishing/grinding units, vacuum former for retainer/aligner fabrication, light-cure unit for composite work, and bench space for impression handling and minor adjustments. Full prosthetic laboratory work (cast crowns, bridges, dentures from scratch) typically goes to dedicated commercial dental laboratories rather than chairside lab — the chairside lab handles same-day adjustments and emergency repairs.

Toplam uzunluk	14.4 m · 47.2 ft
Genişlik (nakliye)	2,99 m
Genişlik (konuşlandırılmış)	2,99 m
Yükseklik (nakliye)	3.10 m
Zemin alanı (konuşlandırılmış)	43.1 m²
Boş ağırlık	16.4 t
Şasi	EN 10025 S355JR sıcak hadde çelik · EN 1090 EXC-2
Kaynak kalitesi	EN ISO 3834-3
Zarf	Sandviç panel, PIR çekirdek 80 mm · λ ≈ 0,023 W/(m·K)
Yangın direnci	EI-30 · EN 13501-2'ye göre test edilmiş
Zemin	EPDM üzerine denizcilik kontrplak · R-10 kayma sınıfı
Elektrik tesisatı	400 V / 50 Hz · 3 fazlı · IEC 60364 uyumlu
İklimlendirme	VRF çok bölmeli · HEPA H13 (tıbbi)
Çalışma aralığı	−25 °C ile +50 °C ortam
Rüzgar sınıfı	140 km/s temel rüzgar için tasarlandı (EN 1991-1-4)
Sismik tasarım	EN 1998-1 (Eurokod 8) uyarınca · sünek sınıf DCM
Nakliye	ISO 668 ayak izi · CSC plakası uygun (konteyner varyantlar)
Kurulum süresi	Sahada 2–7 gün

Modular Dental Clinic — Engineered once, deployable many times.

Tipik Konuşlanma Sırası

Spec sheet — STR-2104

Sağlık kategorisinden daha fazlası

Mobile Blood Donation Trailer

Mobil Klinik Römorku

Mobile CT Scan / MRI Trailer