
Engineered once, deployable many times.
An emergency field hospital is a rapidly deployable medical facility engineered to restore healthcare capacity within 72 hours of a disaster, epidemic or mass casualty event. structmod emergency field hospitals are built around expandable trailers and container modules that arrive pre-wired, pre-plumbed and functionally tested — so your clinical team walks into a working hospital on day one, not a construction site.
Each emergency field hospital ships with its own power, water, HVAC, medical gas and waste systems, making it fully self-sufficient on arrival. Configurations range from 20-bed primary-care units for remote disaster zones up to 100-bed facilities with damage-control surgery, ICU, imaging and laboratory — all scalable by linking additional modules through shared corridors. For larger surge events, two or more 100-bed units combine into 200-300 bed complexes without additional engineering.
structmod works with health ministries, disaster-relief agencies, NATO-aligned defence forces and UN agencies to specify, manufacture and pre-position emergency field hospitals worldwide. Units can be flown in by C-130 / C-17 aircraft, transported by sea or towed to site, then deployed by a 4-6 person crew with minimal site preparation. Every emergency field hospital meets WHO EMT Type 1 or Type 2 minimum standards and carries full EN 1090 structural certification.
Tipik Konuşlanma Sırası
- Saat 0–2 — römork veya konteyner üniteler sahaya ulaşır
- Saat 2–6 — konumlandırma, tesviye ve üniteler arası bağlantı
- Saat 6–12 — zarf sızdırmazlığı, MEP bağlantısı, tıbbi gaz
- Saat 12–24 — ekipman montajı, devreye alma, FAT
- Saat 24–72 — kullanıcı eğitimi, operasyonel teslimat
Spec sheet — STR-2433
| Toplam uzunluk | 15.3 m · 50.2 ft |
|---|---|
| Genişlik (nakliye) | 2,99 m |
| Genişlik (konuşlandırılmış) | 2,99 m |
| Yükseklik (nakliye) | 3,00 m |
| Zemin alanı (konuşlandırılmış) | 45.7 m² |
| Boş ağırlık | 12.3 t |
| Şasi | EN 10025 S355JR sıcak hadde çelik · EN 1090 |
| Kaynak kalitesi | EN ISO 3834-2 · sertifikalı kaynak koordinatörü (IWE) |
| Zarf | Sandviç panel, PIR çekirdek 80 mm · λ ≈ 0,023 W/(m·K) |
| Yangın direnci | EI-30 · EN 13501-2'ye göre test edilmiş |
| Zemin | EPDM üzerine denizcilik kontrplak · R-10 kayma sınıfı |
| Elektrik tesisatı | 230 V / 50 Hz · TN-S · IEC 60364 uyumlu |
| İklimlendirme | Split inverter ısı pompası · MERV-8 |
| Çalışma aralığı | −25 °C ile +50 °C ortam |
| Rüzgar sınıfı | 130 km/s temel rüzgar için tasarlandı (EN 1991-1-4) |
| Sismik tasarım | EN 1998-1 (Eurokod 8) uyarınca · sünek sınıf DCM |
| Nakliye | ISO 668 ayak izi · CSC plakası uygun (konteyner varyantlar) |
| Kurulum süresi | 24–72 saat · 4–6 kişilik ekip |
Tam çizimler, hesap notları, DoP, İ&B kılavuzu ve FAT raporu her ünite ile dahildir. Özellikler gösterge niteliğindedir — proje gereksinimlerine göre yapılandırılabilir.