Engineered once, deployable many times.

A mobile quarantine trailer is a road-deployable isolation facility for infectious disease management — negative-pressure isolation room with anteroom airlock for PPE workflow and HEPA-filtered exhaust to prevent pathogen spread. structmod mobile quarantine trailers deploy to outbreak response sites within hours of activation, providing isolation capability before fixed quarantine infrastructure can be mobilised, supporting border health screening at international entry points, and providing surge isolation capacity for hospitals during epidemic peaks.

Standard configurations include 1-2 isolation patient bays (typically 8-12 m² each with single bed, en-suite bathroom, and patient monitoring), anteroom airlock buffering between corridor and isolation zone with PPE donning/doffing infrastructure, control vestibule for staff workflow management, and HEPA-filtered exhaust system (HEPA H13 filtration, discharge above the trailer roofline). Pressure differential is maintained at -10 Pa to -25 Pa relative to corridor, with pressure monitoring and audible/visual alarms for any deviation. Patient flow follows infection control workflow: corridor (clean) → anteroom (PPE donning) → isolation room → anteroom (PPE doffing) → corridor.

structmod mobile quarantine trailers serve outbreak response programmes where isolation capability must deploy within hours of activation, border health authorities running quarantine for symptomatic international travellers, hospital isolation surge during epidemic peaks (where existing fixed isolation runs out of capacity), and humanitarian outbreak response (Ebola, Marburg, novel respiratory viruses in fragile health systems). Lead time is 12-14 weeks from contract signature for stock configurations. Compliance includes WHO Infection Prevention and Control standards, ASHRAE 170 ventilation for healthcare facilities, CDC Isolation Precautions guidance.

Tipik Konuşlanma Sırası

1. Saat 0 — römork çekici araçla gelir, konumlandırılır ve takoz vurulur
2. Saat 0–1 — dengeleme krikoları açılır, tesviye doğrulanır
3. Saat 1–2 — hidrolik duvarlar veya genişleme panelleri açılır
4. Saat 2–3 — altyapı bağlantıları (elektrik, su, atık su)
5. Saat 3–4 — FAT protokolüne göre işlevsel test
6. Saat 4 — kullanıcı eğitimiyle operasyonel teslimat

Spec sheet — STR-3050

Tam çizimler, hesap notları, DoP, İ&B kılavuzu ve FAT raporu her ünite ile dahildir. Özellikler gösterge niteliğindedir — proje gereksinimlerine göre yapılandırılabilir.