Question 1

What seismic frequency bands and dynamic ranges does the station record?

Accepted Answer

Standard broadband seismometer pads accept instruments covering 0.0083 Hz to 100 Hz (120-second to 10-millisecond period range) — covering teleseismic earthquakes through local microseismicity. Strong-motion accelerometer pads accept instruments with full-scale acceleration up to ±2g — covering near-source ground motions during major earthquakes. Combined instrumentation provides full coverage from distant magnitude 7+ earthquakes through nearby magnitude 8+ near-source recording.

Question 2

How are recordings telemetered to the monitoring network?

Accepted Answer

Telemetry options include cellular 4G/5G (sufficient bandwidth for real-time broadband data plus event-triggered strong-motion data), satellite link (for remote sites without cellular coverage — VSAT or low-earth-orbit options), wireless mesh networks (for site clusters within line-of-sight), and dedicated terrestrial radio (for older legacy networks). Local data storage backs up telemetry against communications outage — typically 30+ days of continuous broadband data plus all event-triggered records.

Question 3

What environmental conditioning protects the seismic instruments?

Accepted Answer

Temperature stability is critical for broadband seismometer sensitivity — typical specification is ±2°C around the instrument over 24-hour periods. The modular unit's climate control achieves this with minimal HVAC duty cycling near the instrument enclosure. Humidity control prevents corrosion of sensitive electronics. The instrument enclosure itself is acoustically and thermally isolated from the operator workspace to prevent operator activity from contaminating recordings.

Question 4

Can the station support multi-instrument geophysical observatories?

Accepted Answer

Yes. Extended configurations integrate multiple geophysical disciplines beyond seismology: GNSS for continuous crustal deformation, geomagnetic instruments for magnetic field variation, gravity instruments (relative or absolute gravimeters), groundwater monitoring (water level, temperature, conductivity for earthquake precursor research), and meteorology for environmental data. Multi-instrument configurations are common at strategic observatory sites where geophysical diversity matches the research questions.

Question 5

What is the operational autonomy of the station in remote deployments?

Accepted Answer

Onboard battery system supports 5-7 days of full operations during grid outages. Solar charging extends autonomy indefinitely on sites with adequate insolation. Remote sites typically combine solar primary power with battery backup for autonomous operations through extended grid-free deployment. Site visits for instrument maintenance, calibration check and consumables replacement are typically required at 3-6 month intervals depending on site reliability and instrument family.

الطول الكلي	15.4 m · 50.5 ft
العرض (أثناء النقل)	2.99 م
العرض (بعد الفرد)	2.99 م
الارتفاع (أثناء النقل)	3.10 m
مساحة الأرضية (بعد الفرد)	46.0 m²
الوزن الفارغ	16.4 t
الهيكل	فولاذ مُدرفل على الساخن EN 10025 S355JR · EN 1090 EXC-2
جودة اللحام	EN ISO 3834-3
الغلاف	لوح ساندويتش، نواة PIR 80 مم · λ ≈ 0.023 واط/(م·كلفن)
مقاومة الحريق	EI-30 · مُختبر وفق EN 13501-2
الأرضية	خشب رقائقي بحري على EPDM · تصنيف مقاومة انزلاق R-10
الكهرباء	400 فولت / 50 هرتز · ثلاثي الطور · مطابق IEC 60364
التكييف والتهوية	VRF متعدد الانقسام · HEPA H13 (طبية)
نطاق التشغيل	−25 °م إلى +50 °م (محيط)
مقاومة الرياح	مُصمَّم لرياح أساسية 140 كم/س (EN 1991-1-4)
التصميم الزلزالي	وفق EN 1998-1 (يوروكود 8) · فئة مطيلية DCM
النقل	بصمة ISO 668 · مؤهّل للوحة CSC (الإصدارات الحاوية)
زمن التجهيز	2–7 أيام في الموقع

هندسة مرة واحدة، نشر متعدد.

تسلسل النشر النموذجي

ورقة المواصفات — STR-3274

المزيد من الوحدات الجاهزة

وحدة الإقامة الجاهزة

وحدة المخبز الجاهزة

وحدة البث الجاهزة