Engineered once, deployable many times.
An expandable dental clinic trailer combines the transport efficiency of a road trailer with the clinical floor area of a fixed dental practice — opening to 7.5-8 m deployed width to accommodate 3-4 dental chair bays, sterilisation suite, intraoral imaging and dental laboratory bench in one self-contained unit. structmod expandable dental clinic trailers serve dental outreach programmes where multiple chair operation justifies the deployment overhead, school-based dental programmes covering large catchments, corporate occupational dental services, and humanitarian dental missions.
Standard configurations include 3-4 dental chair bays organised as facing pairs across the central corridor, with each chair pre-installed with chairside delivery unit, suction, compressed air, water supply, overhead operatory light, x-ray sensor mounting and instrument tray storage. Centralised sterilisation bay with linear dirty-to-clean workflow occupies one end of the trailer; dental compressor and central suction units sit in the trailer's mechanical bay; intraoral x-ray with appropriate lead shielding serves the chair bays. Reception and waiting area at the trailer entrance manages patient flow.
structmod expandable dental clinic trailers serve dental programmes where chair throughput justifies deployment time — typical workforce camp dental support, school district dental programmes covering multiple schools per week, military garrison dental support deploying to multiple bases, and humanitarian dental missions. The expandable configuration delivers 3-4x the patient throughput of a fixed-width 2-chair mobile dental trailer, justifying the longer deployment cycle for sites where the trailer remains in operation for full clinical days. Lead time is 12-14 weeks from contract signature.
Typical deployment sequence
- Hour 0 — trailer arrives on tow vehicle, positioned and chocked
- Hour 0–1 — stabilizer jacks deployed, leveling verified
- Hour 1–2 — hydraulic walls or slide-outs extended where fitted
- Hour 2–3 — utility connections (power, water, wastewater)
- Hour 3–4 — functional test per FAT protocol
- Hour 4 — operational handover with user training
Spec sheet — STR-3192
| Overall length | 15.2 m · 49.9 ft |
|---|---|
| Width (transport) | 2.55 m |
| Width (deployed) | 5.00 m |
| Height (transport) | 2.70 m |
| Floor area (deployed) | 76.0 m² |
| Dry weight | 15.2 t |
| Chassis | EN 10025 S355JR hot-rolled steel · EN 1090 EXC-2 |
| Welding quality | EN ISO 3834-3 |
| Envelope | Sandwich panel, PIR core 80 mm · λ ≈ 0.023 W/(m·K) |
| Fire resistance | EI-30 · tested to EN 13501-2 |
| Floor | Marine plywood on EPDM · R-10 slip rating |
| Electrical | 230 V / 50 Hz · TN-S · IEC 60364 compliant |
| HVAC | Split inverter heat pump · MERV-8 |
| Operating range | −25 °C to +50 °C ambient |
| Wind rating | Designed for 130 km/h basic wind (EN 1991-1-4) |
| Transport | ISO 668 footprint · CSC plate eligible (container variants) |
| Setup time | 4 hours · 2-person crew |
Full drawings, calculation notes, DoP, O&M manual and FAT report included with every unit. Specs indicative — configurable to project requirements.