Engineered once, deployable many times.
A mobile dental clinic trailer brings full dental surgery capability to communities without fixed dental infrastructure — school-based dental programmes, rural outreach, workforce dental support in remote camps, humanitarian response, and urban underserved populations. structmod mobile dental clinic trailers deliver 2-4 dental chair capacity with all supporting systems — compressor, suction, sterilisation, imaging and consumables storage — integrated into a road-legal semi-trailer that sets up in 2-4 hours at the clinical site.
The standard 4-chair configuration organises the trailer as two treatment zones separated by a central corridor: each zone has two dental chairs with overhead operatory lights, chairside cuspidors, instrument trays and x-ray film/sensor workflow. A centrally-located sterilisation bay handles instrument decontamination, autoclave cycling and sterile packaging for the chairs. Dental compressor and central suction units sit in the trailer's mechanical bay, piped to each chair via the ceiling. Intraoral x-ray operates from a mobile unit shared across chairs, with digital radiography preferred for faster workflow and lower radiation dose. A reception and waiting area at the trailer entrance manages patient flow.
structmod mobile dental clinic trailers serve health ministries running school dental programmes, NGOs delivering humanitarian oral care, corporate operators servicing workforce dental benefits, and private dental chains extending service to underserved populations. Lead time is 8-12 weeks from contract signature. EN 1090 EXC-2 chassis construction, DOT/E-mark road homologation, IEC 60364-7-710 medical electrical, and compliance with destination-country dental practice regulations ensure regulatory readiness in target markets.
Typical deployment sequence
- Hour 0 — trailer arrives on tow vehicle, positioned and chocked
- Hour 0–1 — stabilizer jacks deployed, leveling verified
- Hour 1–2 — hydraulic walls or slide-outs extended where fitted
- Hour 2–3 — utility connections (power, water, wastewater)
- Hour 3–4 — functional test per FAT protocol
- Hour 4 — operational handover with user training
Spec sheet — STR-2780
| Overall length | 14.0 m · 45.9 ft |
|---|---|
| Width (transport) | 2.99 m |
| Width (deployed) | 2.99 m |
| Height (transport) | 2.90 m |
| Floor area (deployed) | 41.9 m² |
| Dry weight | 17.0 t |
| Chassis | EN 10025 S355JR hot-rolled steel · EN 1090 EXC-2 |
| Welding quality | EN ISO 3834-3 |
| Envelope | Sandwich panel, PIR core 80 mm · λ ≈ 0.023 W/(m·K) |
| Fire resistance | EI-30 · tested to EN 13501-2 |
| Floor | Marine plywood on EPDM · R-10 slip rating |
| Electrical | 120/240 V · 60 Hz (US-spec) · IEC 60364 compliant |
| HVAC | Packaged rooftop · MERV-13 |
| Operating range | −25 °C to +50 °C ambient |
| Wind rating | Designed for 150 km/h basic wind (EN 1991-1-4) |
| Transport | ISO 668 footprint · CSC plate eligible (container variants) |
| Setup time | 2 hours · 2-person crew |
Full drawings, calculation notes, DoP, O&M manual and FAT report included with every unit. Specs indicative — configurable to project requirements.