Question 1

What workforce capacity does a modular office building accommodate?

Accepted Answer

Capacity depends on workspace density and module count. A typical single-storey 600 m² modular office accommodates 50-75 staff at standard density (8-12 m²/workstation). A 2-storey 1,200 m² configuration accommodates 100-150. Larger 4-storey configurations push capacity above 300-400 staff per unit footprint. Density planning depends on workplace strategy — higher density (6-8 m²/workstation) for hot-desking, lower density (12-18 m²/workstation) for executive or specialist roles.

Question 2

Can the modular office be configured for hot-desking and flexible workspace?

Accepted Answer

Yes. Flexible workspace features include: shared workstation banks rather than fixed-allocation desks, lockers for personal storage of laptops and personal items, focus rooms for concentrated work, phone booths for confidential calls, breakout areas for informal meetings, hot-desk booking system integration, and MEP infrastructure (power, data) sized for variable occupancy. Workplace strategy is the operating organisation's decision; the modular building provides the configurable workspace shell.

Question 3

How does the modular office building handle IT infrastructure?

Accepted Answer

IT infrastructure features include: structured cabling pre-installed in floor or ceiling cable trays, data and power outlets distributed at workstation positions, server room with appropriate cooling capacity (typically 5-10 kW per rack with redundant cooling), wireless access point provisions throughout the building, audiovisual infrastructure in meeting rooms (HDMI, USB-C, network connectivity for unified communications), and electrical capacity sized for the IT load plus standard office power. IT equipment selection is the operating organisation's procurement decision.

Question 4

What is the difference between modular office and modular accommodation?

Accepted Answer

Modular office is configured for daytime work activity — workstation layout, meeting rooms, kitchen and breakout facilities, no sleeping or extended-stay accommodation. Modular accommodation (separate product) is configured for sleeping and extended residence — bedrooms with bathrooms, communal lounges, dining rooms, and full residential infrastructure. The two products use the same modular construction approach but with different interior fit-outs. Combined configurations are achievable for sites needing both office and accommodation capability.

Question 5

Can the office building be relocated if business needs change?

Accepted Answer

Single-storey modular office buildings can be relocated, though the cost of relocation (disconnect, transport, recommission, plus site preparation at the new location) is typically 30-50% of the original project cost. Multi-storey buildings on engineered foundations are more difficult to relocate practically — typically the building stays at the original site and is repurposed if the original use becomes redundant. Relocatable design is possible if specified at procurement but adds complexity and cost.

الطول الكلي	14.1 m · 46.3 ft
العرض (أثناء النقل)	2.99 م
العرض (بعد الفرد)	2.99 م
الارتفاع (أثناء النقل)	3.20 m
مساحة الأرضية (بعد الفرد)	42.2 m²
الوزن الفارغ	17.1 t
الهيكل	فولاذ مُدرفل على الساخن EN 10025 S355JR · EN 1090 EXC-2
جودة اللحام	EN ISO 3834-3
الغلاف	لوح ساندويتش، نواة PIR 80 مم · λ ≈ 0.023 واط/(م·كلفن)
مقاومة الحريق	EI-30 · مُختبر وفق EN 13501-2
الأرضية	خشب رقائقي بحري على EPDM · تصنيف مقاومة انزلاق R-10
الكهرباء	120/240 فولت · 60 هرتز (مواصفات أمريكية) · مطابق IEC 60364
التكييف والتهوية	وحدة سقفية متكاملة · MERV-13
نطاق التشغيل	−25 °م إلى +50 °م (محيط)
مقاومة الرياح	مُصمَّم لرياح أساسية 150 كم/س (EN 1991-1-4)
التصميم الزلزالي	وفق EN 1998-1 (يوروكود 8) · فئة مطيلية DCM
النقل	بصمة ISO 668 · مؤهّل للوحة CSC (الإصدارات الحاوية)
زمن التجهيز	3 ساعات · طاقم شخصين

هندسة مرة واحدة، نشر متعدد.

تسلسل النشر النموذجي

ورقة المواصفات — STR-1421

المزيد من الوحدات الجاهزة

وحدة الإقامة الجاهزة

وحدة المخبز الجاهزة

وحدة البث الجاهزة