Question 1

How does the mobile workshop trailer differ from the modular workshop unit?

Accepted Answer

Mobile workshop trailer is road-deployable on chassis — smaller workshop footprint, suited to field maintenance operations at remote or mobile sites. Modular workshop unit is permanent or semi-permanent installation — larger workshop with overhead crane support and heavy equipment bays, suited to permanent maintenance operations at fixed sites. Trailer suits mobility and lighter maintenance scope; modular suits permanence and heavy maintenance capability.

Question 2

What maintenance operations does the mobile workshop trailer support?

Accepted Answer

Standard configuration supports vehicle maintenance (light to medium vehicles — engine work, suspension, brakes, electrical diagnostics), small equipment maintenance (pumps, compressors, generators, specialty tools), metal fabrication (welding, cutting, drilling, turning — appropriate for repair fabrication rather than production manufacturing), and general repair work. Heavy equipment maintenance (large trucks, heavy plant, military vehicles) requiring overhead crane support typically uses modular workshop unit or purpose-built heavy workshop facilities.

Question 3

What welding capabilities are supported?

Accepted Answer

Welding bay supports MIG welding (most common for general fabrication and repair), TIG welding (precision work, stainless steel, aluminium), stick welding (heavy structural work, outdoor welding), and optional plasma cutting. Fume extraction per EN 12792 captures welding fume at source through articulated extraction arms, routed through HEPA filtration before discharge. Welding power supplies are specified based on expected workload — higher amperage for heavy structural work, lower amperage for precision work.

Question 4

What electrical and air capacity does the workshop provide?

Accepted Answer

3-phase electrical distribution typically 32A (22 kVA) or 63A (44 kVA) per workshop bay — supporting welding power supplies, electrical tools, battery chargers, and workshop lighting. Compressed air distribution (typical 10-13 bar) feeds pneumatic tools, tyre inflation, and equipment cleaning — onboard air compressor (typical 5-15 kW motor) maintains system pressure during sustained use. Higher capacity configurations available for heavy workshop applications.

Question 5

Can the mobile workshop trailer operate off-grid at remote sites?

Accepted Answer

Yes, with the autonomous configuration. Onboard generator (typical 60-100 kVA for full workshop operation) supports electrical load including welding and compressed air. Fuel storage supports 5-7 days of continuous operation. Water tanks and wastewater holding support operator washroom. Satellite or cellular connectivity for coordination with central maintenance management. Total autonomous operation typically 5-10 days at intermittent workshop use. Connection to site utilities is preferred where available for sustained operations.

الطول الكلي	13.0 m · 42.7 ft
العرض (أثناء النقل)	2.55 م
العرض (بعد الفرد)	5.00 m
الارتفاع (أثناء النقل)	2.70 m
مساحة الأرضية (بعد الفرد)	65.0 m²
الوزن الفارغ	12.0 t
الهيكل	فولاذ مُدرفل على الساخن EN 10025 S355JR · EN 1090 EXC-2
جودة اللحام	EN ISO 3834-3
الغلاف	لوح ساندويتش، نواة PIR 80 مم · λ ≈ 0.023 واط/(م·كلفن)
مقاومة الحريق	EI-30 · مُختبر وفق EN 13501-2
الأرضية	خشب رقائقي بحري على EPDM · تصنيف مقاومة انزلاق R-10
الكهرباء	230 فولت / 50 هرتز · TN-S · مطابق IEC 60364
التكييف والتهوية	مضخة حرارية سبليت إنفيرتر · MERV-8
نطاق التشغيل	−25 °م إلى +50 °م (محيط)
مقاومة الرياح	مُصمَّم لرياح أساسية 130 كم/س (EN 1991-1-4)
النقل	بصمة ISO 668 · مؤهّل للوحة CSC (الإصدارات الحاوية)
زمن التجهيز	ساعتان · طاقم شخصين

هندسة مرة واحدة، نشر متعدد.

تسلسل النشر النموذجي

ورقة المواصفات — STR-2370

المزيد من المقطورات المتنقلة

مقطورة الإقامة المتنقلة

مقطورة صرّاف آلي مصرفي

مقطورة المخبز المتنقلة